MAD - Portable Displays

Arena components

Arena Straight Sections

The Arena Straight Sections are available in a variety of lengths, they are strong but lightweight with a natural silver grey finish. The system is quick and easy to assemble using bolt and wing-nut fixings. This aluminium tubular system is both modular and scalable, where different sections can be assembled and reused according to the needs of each project. The structure can then be dressed with interchangeable UV printed PVC graphics.

Arena Structures Arena Gantry structures for your stand

Display Stands

UT-S250

Section 250mm

These 25mm diameter aluminium tubes have been assembled and welded into sections of various sizes to form the basis of an imposing and solid architecture. A wide range of sections are available to make this solution compatible with your project requirements. With 13 components in various lengths and designs, you can create the right structure for you, and your chosen mode of transport. Simple, tool-free assembly Simple assembly - sections are connected using the supplied bolt and wing-nut fixings, and no tools are required. The double-sided graphics are attached to the gantry using a bungee cord. Create maximum brand visibility using sections up to 6m long without the need for reinforcement.

UT-S500

Section 500mm

UT-S750

Section 750mm

UT-S1000

Section 1000mm

UT-S1250

Section 1250mm

UT-S1500

Section 1500mm

UT-S2000

Section 2000mm

Arena Junction Sections

The Arena Junction Sections are available in a variety of configurations including: 3-way T-junction, 4-way corner junction. The choice of sections enables a custom build design for your application to create a modular and scalable system. The structure can then be dressed with interchangeable UV printed PVC graphics.

Sections assemble easily

Corner connection 3 connections UT-C30

T-junction 3 connections UT-C35

90° angle 2 connections UT-C21

T-junction 4 connections UT-C40

4-way corner connector UT-C41

Foot 250mm UT-BS250

60

61